|Techno-Aide's Head Immobilizer.|
Safely supports patient's head. Solid steel angles with soft vinyl covered cushions. Blocks with handle weigh 15 lbs. each.
|Techno-Aide's Round Paddles Head Immobilizer.|
Ideal for a designated person to keep patient's head comfortable and steady during imaging.
Rigid vinyl discs with comfort grip handles.
7" diameter x 1.5" thick.
Each paddle is 2#.
Both Coated and Un-Coated options.
|Osborne Head Support System.|
The Osborne Head Support System consists of a headrest mounted on a support stand. A chin piece has been added to
provide more stability and comfort. 4 knobs used with the support stand allow adjustment of the headrest to control
precisely the angle of the face piece. The headrest is a modified Duncan Headrest. It is comfortable, and provides a
good airway. Its design eliminates the "closed-in" feeling common with other methods of positioning. With a large, flat
base edged with rubber channel, and sturdy, Plexiglas side-supports for the headrest, the Support Stand is designed to
obviate slippage. The hook & loop adjustable straps attached to the Stand assist in maintaining the head in the desired
space open for the face to breathe in the Stand provides access for tubes and wire mechanisms. The entire Head Support
System is radiolucent and does not affect radiographic techniques.|
|Original Duncan Headrest.|
The Original Duncan Headrest is perfect when treatment is less intensive and less frequent. This apparatus is
designed to keep the head in a prone position for therapy treatment. Physical Therapy Centers and Chiropractic
treatment tend to enjoy this product.|
|Fixed Angle Osborne System.|
This Fixed Angle Osborne Head Support System is a non-adjustable fixed angle version of the Osborne System and
has been designed for use with most standard fluoroscopic tables. The head support of this unit is fixed at a 40 degree
angle to the base and does not have the adjustment knobs. The space open for the face to breath in the Stand provides
tubes and wire mechanisms.|
|Improved Duncan Headrest.|
The Improved Duncan Headrest doubles the thickness of the plastic cradle and adds rubber channel to the rocker
legs to help avoid slippage. Because of its added strength, it is better suited for more intensive uses.|
|Adjustable Cassette Tray.|
The Adjustable Cassette Tray, which may be used with any Osborne head support, allows placement of a grid
cassette, crosswise, directly under the cervical vertebrae for accomplishing the difficult 20 degree angle and P.A.
films without moving the patient.|
|Goniometric Osborne Head Support System.|
The Goniometric Osborne Head Support System provides a significant improvement to the original Osborne: a
goniometer for precise measurement of extension or flexion of the neck. In addition, the chin may be placed at any of
three heights to facilitate greater extension or flexion. With the Goniometric Osborne, once a patient's head has been
set at the correct position for treatment, the precise angle may be recorded so that the patient may be repositioned
exactly the same for later treatments without the need for measurement. The space open for the face to breathe in the
Stand provides access for tubes and wire mechanisms.|
|MG Supine Stand.|
The plain MG Supine Stand stand is ideal for virtually any kind of treatment where the patient must lay supine.
The Stand places the patient's head in the proper position for certain comfort.|
|Adjustable Supine Stand.|
The Adjustable Supine Stand is ideal for situations where it is necessary to precisely position the patient's
head. It consists of a headrest mounted on a support stand. Four knobs allow adjustment of the headrest to control
precisely the height and angle of the headrest. With the adjustable supine stand, the patient's head may be raised from
1 to 9 cm off the table surface. The patient's head may also be tilted up to 20 degrees forward or back. The adjustable
supine stand may be optionally ordered with hook & loop straps to hold the patient's chin in a 3 point position.|